Liquid silicone for mold | Pourable silicone | Soap mould silicone

Liquid silicone for mold | Pourable silicone | Soap mould silicone

  • Liquid silicone for mold | Pourable silicone | Soap mould silicone
  • Liquid silicone for mold | Pourable silicone | Soap mould silicone
  • Liquid silicone for mold | Pourable silicone | Soap mould silicone
  • Liquid silicone for mold | Pourable silicone | Soap mould silicone
  • Liquid silicone for mold | Pourable silicone | Soap mould silicone
Unit Price: USD7.42/KG  Get Latest Price
Model No.: ZEW 25
Min. Order: 200KG
Packaging: 20KG/drum.200KG/drum
Delivery Time: 5 Days
Place of Origin: Shenzhen
Brand: Zhuo er wei

Product Description

Usage: 
          For the duplication and mold making of glass crafts, lighting, candle, culture relics duplications.
Description: 
          ZEW 25# Liquid silicone for molds ( Pourable silicone\Soap mould silicone ) is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This Liquid silicone for molds ( Pourable silicone\Soap mould silicone ) is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is lower than 2‰.
Applications: Poly technique, lightings, candles, and  molds in multiple pieces for large products.
Liquid silicone for molds\Pourable silicone\Soap mould silicone Standard Datasheet:

Model

Appearance

Viscosity (cps)

Hardness (Ao)

Tensile Strength (Mpa)

Tear Strength (kN/m)

Elongation (%)

Mixing ratio(%)

Operating Time(H)

Curing Time(H)

ZEW 25

White

≤20000

26±2

≥3.1

≥24

≥410

2~3

0.5~1

2~5

General Description: 
          RTV-2 Liquid silicone for molds and pourable silicone and soap mould silicone are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the liquid silicone for molds and pourable silicone and soap mould silicone is still operational within 30 minutes,and in 2-5 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The liquid silicone for molds  is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.

Operation Instruction for RTV-2 Liquid silicone for molds and pourable silicone and soap mould silicone:

          The product is white or red flowing liquid with general hardness of 34-38A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if  the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed./span>

(Note:  3%-5% silicone oil can be added to soften the mold for easy demould.)

The proportions and reactions of the curing agent and the silicon are listed as follows:

1. Adding curing agent 1%, the silicon can still be operated within 2.5 hours and can be demoulded after 6-8 hours.

2. Adding curing agent 2%, the silicon can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.

3. Adding curing agent 3%, the silicon can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.

4. Adding curing agent 4%, the silicon can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>